|
|
Provides constant flow for up to eight nozzles at a
predetermined flow rate set at installation. Constant flow
means faster fueling times during daily peak business periods.
|
|
|
|
Dry Running Protection
|
|
|
|
The IST monitors the power consumption of the motor allowing the
Variable Frequency Controller to turn off the pump if the tank becomes
empty. This means less bearing wear and longer motor life.
|
|
|
|
Meets EPA "Spitback" Control
|
|
|
|
The EPA requires a maximum flow rate per nozzle of ten GPM. To comply
the maximum flow rate for one nozzle is adjusted at
installation. The IST will provide a constant flow rate for up
to eight nozzles operating simultaneously.
|
|
|
|
High Quality Check Valve
|
|
|
|
FE Petro's proven line check valve at two and
three quarters (70mm) in diameter reduces pressure loss at high flow
rates resulting in faster fuel times and lower power consumption.
|
|
|
|
Simplified Servicing
|
|
|
|
The pump can be easily removed from the tank by
removing three bolts. There is no need to disconnect the siphon
system, or remove the leak detector from the system to service the STP.
|
|
|
|
Variable Length Option
|
|
|
|
One pump fits ninety four percent of all known
tank diameters and tank bury depth combinations. Pump length is
set at the job site in about twenty minutes without affecting the UL
listing of the pump.
|
|
